central iowa | minn gopher - 9/18/2024 20:21
Anyone have a solution to keep the cover clean? We replace the bearings. Still plugs, this is a AWS. We had a F930 with a crary many years ago and that cover was spinning seemingly as fast as the fan. TIA
A couple years ago they came with a nozzle to put on the fan That well help with that. Just have to drill a hole and put a screw or two in. Not perfect, but helps quite a bit.
Email is good if you don’t have someone local to help you
I just re looked at your pic and it looks like you mounted a modified air tube trying to help, this didn’t help any?
Edited by Allis4ever 9/18/2024 22:36
|
Air bar fan cover plugging
