Near Intersection of I-35 & I-90 Southern Mn. | From above:
AgFiniti Mobile app: available only on iPadOS. It can do what the AgFiniti app can do, but also more. Specifically:
- sync data from InCommand displays (either in hotspot mode or regular wifi mode)
- supports DisplayCast (so that you can see the current location of each display, along with its current activity, and the status of the fields. also lets you show up on other displays so that they can see your location too)
- allow you to remotely view and control InCommand displays (if you have permission to and the display's current operator agrees)
These uses would require having internet access in the vehicle. I do not have internet access nor care to use those features but still find that Ag Finiti Mobile is useful for me. I agree on the confusion of using the term Ag Finiti with both products. Using the term SteerCommand and then Steer Command Z2 for steering systems is another area of potential confusion.
Here is a screen shot from planting and another from harvest. This data was transferred wirelessly from an InCommand 1200 to the iPad. The iPad was present in the planting tractor and combine. We do this also with the Hagie Sprayer for recording post applications and Y-drops.
We had excessive rain early in the season which caused many drowned out spots even in well drained fields. This is observable in the areas of extremely poor yields. Besides the actual poor yields, the situation was made worse since the combine wasn't doing a very good job of threshing in those areas since I couldn't keep the threshing area sufficiently full of corn.
Edited by tedbear 11/13/2024 08:10
 (Stencel Planting (full).jpg)
 (Stencel Harvest (full).jpg)
Attachments
----------------
 Stencel Planting (full).jpg (112KB - 5 downloads)
Stencel Harvest (full).jpg (137KB - 3 downloads)
|
Ag leader version of fieldview
