Posted 1/5/2025 09:03 (#11041843 - in reply to #11041176) Subject: RE: Round bale spear for backhoe loader?
NEMO
I mounted a two prong three point hitch speer in our bucket.
Weld a piece of pipe on a piece of flat cut a hole in the bucket bottom slide the pipe over the pins and bolt it down.
There's a large hook in the center back of our bucket so I made a toplink and bolted it to that.
I found that I could reach over a bale from the side a tuck and squeeze it with the hoe so I could carry two bales at a time.
Round bale spear for backhoe loader?
