|
NE Indiana | It's because a seed is dropping every now and again through the seed tube while the planter is up. The alarm probably says something like seed flow detected with planter up, but it doesn't go on long enough for it to pop up on the screen. I think there is a check box somewhere in the seed monitor settings that says something like ignore alarms with planter up or something like that. It's been a while since I've dealt with an STMM, but I remember having that problem and something like that fixed it. I'm guessing your implement switch is tied to your liquid module. If you are not using the liquid module, it would likely be a good idea to move that implement switch connection to the STMM module. The plug in the module is the same so just move it from the liquid module over to the STMM | |
|
Incommand 1200 alarm sounding but no error showing
