|
North West IA/western AZ | I have the whole system, works well. It may cut a little higher than stock, but I'm notill and the thougher guards make up for it all. I also installed the Pro Drive on my 30' 1020 because the Case wobble was not doing it's job. Checkout your wobblebox before you do anything. With the old sickle still attached, turn the wobble pulley forward until the knife stops, make an index mark on the pulley, keep turning in the same direction until the knife starts to move the opposite direction, make another index mark. Measure between the marks, if it is over an inch, it needs to be rebuilt or replaced. I replaced mine because the prodrive overstrokes by 1/4". I ended up witha much cleaner cut. | |
|
SCH cutting system and roller guides ?
